M

miggermungo

New Member

• Jul 18, 2011

• #1

decided to change manual seats to electric in my 96 p38, chap said just plug em in and bolt em up, pluged in two leads that were there, seats dont move, noticed a socket on the underside at the back of the seats would there be a plug and loom hidden under carpet or somwere, or do u have to buy a seperate plug in loom, or can u not fit electric seats to this model, please help me as i have had to put a cushion behind me as i cant reach the pedals

 

Datatek

Well-Known Member

• Jul 18, 2011

• #2

If you have Hi Line BECM then it can be done you would need the loom and maybe the feature would need to be enabled, if you have a Lo Line BECM you have a problem, you would have to rig up your own electrics.
What model and engine?

 

M

miggermungo

New Member

• Jul 19, 2011

• #3

cheers for replying datatek , my vehicle is a 1996 2.5 dse, no doubt im up sxxt creek hope we can come up with somthing thanks mal

 

CEZ1869

New Member

• Jul 19, 2011

• #4

miggermungo said:

cheers for replying datatek , my vehicle is a 1996 2.5 dse, no doubt im up sxxt creek hope we can come up with somthing thanks mal

Click to expand...

Absolutely..! Put yer old ones back in.! Simples..

 

MikeV8SE

New Member

• Jul 19, 2011

• #5

Whats the difference between hi and lo BECM, and how do you know which you have??

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Jul 19, 2011

• #6

seats etc sticker on bcem

 

jamesmartin

Well-Known Member

• Jul 19, 2011

• #7

read the number on it some los have been uprated to high as a matter of course when becm was replaced as it save carrying to parts

 

Irishrover

Well-Known Member

• Jul 19, 2011

• #8

There will be either a large(ish) "H" or "L" on the label. If the info has faded, the only other way is to have a look at the upper power board Mosfets. The "H" has more than the "L" to power the additional circuits.
The chances are yours is a "L" unless it's been changed at some time.
They did away with the "L" in later years and only fitted the "H" as standard.
You will need the harness from the seat ecu to the Becm with a green connector on.
The seats when connected are "Plug & Play" and do not need enabling in the Becm. You will not have the exterior mirror memory function though.

 

M

miggermungo

New Member

• Jul 20, 2011

• #9

thanks for the info irishrover i will look into it or dig out my old shoes from the 70s mal