ThankyouYou should be able to pop the collet out with a couple of flat screwdrivers from the side then the o ring can come out with a small pick.
Is there one or two o rings?
Two, iirc.
Just to be clear, don't try to unscrew the brass connector, just pop out the collet located in it and you should see the o-rings.
Thanks done it today replaced both o ringsTwo, iirc.
Just to be clear, don't try to unscrew the brass connector, just pop out the collet located in it and you should see the o-rings.
There were 2 orings in mineIs there one or two o rings?