D

dubloman

Active Member
Hi

I am wanting to replace the 3 seals on the FIP on my 97 p38.

I had a discussion with someone on here who posted a step by step guide but I can't find it for the life of me.

Can anyone help and guide me back to the link.

It's the 2 from the top of the pump and the big O ring at the back that needs to be picked out

Thanks in advance
 
dubloman said:
Hi

I am wanting to replace the 3 seals on the FIP on my 97 p38.

I had a discussion with someone on here who posted a step by step guide but I can't find it for the life of me.

Can anyone help and guide me back to the link.

It's the 2 from the top of the pump and the big O ring at the back that needs to be picked out

Thanks in advance
Click to expand...
It was just the top seal on both mine but the diesel ran down and made it look like there were lots of leaks.
 
It was @brianp38dse I think.
The injector head at the back of the pump can be done on engine and only undo the injector head piece until you can just see the oring. Any further and you run the risk of parts inside dropping out of position... Take your time 😊
 
You must log in or register to reply here.

Similar threads

H
P38A P38 2.5DSE BMW High pressure fuel pump seal replacement
Replies
6
Views
1K
brianp38dse
brianp38dse
UnitLandy
P38 Diesel Injector Pump & Cam Top Dead Centre?
2
Replies
28
Views
2K
UnitLandy
UnitLandy
aaronparke1
P38A Disco 2 hubs on a P38
Replies
15
Views
818
pwood999
pwood999
M
2010 RR SC V8 5.0 L Ace pump bypass
Replies
0
Views
618
Majistrat
M
I
P38A Back again, Newbie P38
Replies
6
Views
765
marjon
marjon