S

stubradley1

Active Member

• Dec 28, 2011

• #1

Hi Dad's landrover went for m.o.t today it passed but had an advisory that outriggers need welding or replacing.
Not sure what is meant by outriggers any one helpful want to give me some part numbers please

 

barmatt

Well-Known Member

LZIR Despatch Agent

• Dec 28, 2011

• #2

Might help if ya tell us what landie it is

 

S

stubradley1

Active Member

• Dec 28, 2011

• #3

Lol 300 tdi n plate 95 whoops

 

lerk

New Member

• Dec 28, 2011

• #4

barmatt said:

Might help if ya tell us what landie it is

Click to expand...

Would've thought that this post being in the Disco section would tell you something about that!


Outriggers - I would imagine would refer to the supports from the chassis legs to the body floor at either the front or rear of the passenger compartment.
Will probably just patch up with plate quite easily...

 

GreenHornet

Well-Known Member

• Dec 28, 2011

• #5

Outriggers -two each side on the flanks of the chassis, supporting the body at the A pillar base and just in front of the rear wheel.

They are basically upside down U channels with flat tops. You can easily weld the sides but the top would be harder to access.

Hope this helps

 

S

stubradley1

Active Member

• Dec 29, 2011

• #6

so can these be bought? or need to fabricate ourselves?
part numbers would be handy just so i can get a better idea of what i'm looking for.

 

alexdon

Active Member

• Dec 29, 2011

• #7

Part Nos are STC9129, 9130, 9131, 9140

Nos 4 & 5 in diagram

 

Attachments

• 
  outriggers.png

  76.2 KB · Views: 354

S

stubradley1

Active Member

• Dec 29, 2011

• #8

alexdon said:

Part Nos are STC9129, 9130, 9131, 9140

Nos 4 & 5 in diagram

Click to expand...

Cheers for that