Grrrrrr
Technician, Bodgit & Scarper Ltd
Not too bad. I did a write up in the How To or Technical Archive section. I think the photosgot lost when the site moved but there is Word document version in Google Docs.
No need to touch ball joints, just whip the hub off. Plenty of Plusgas and a hammer - real Landy work.
No need to touch ball joints, just whip the hub off. Plenty of Plusgas and a hammer - real Landy work.
Grrrrrr
Technician, Bodgit & Scarper Ltd
Yeah, not bad. The hardest part is getting the hub off. Don't rush that part. Plusgas, cup of tea while it soaks, score round edge with screwdriver or punch or similar, back the bolts off and then hammer bolts. Repeat about 3 times and it'll suddenly go and you're away.
tomcat59alan
Well-Known Member
Get new collars for them as well. Mine were seized in the carrier so had to be destroyed to get the hub off. New sensors and collars fitted and I elongated the hole in the dust cover so that if I ever have to take the hubs off again the sensors can stay in place
Grrrrrr
Technician, Bodgit & Scarper Ltd
Might just need pushing in all the way. They need a white grease.
