R

rossgillanders

New Member

• Today at 09:00

• #1

I purchased a one touch indicator upgrade from britpart but I can’t get it to work. The part installs into the normal loom but there is an additional 2 plugs that’s I can’t figure out where they go. Indicator works fine with the in loom installed but doesn’t give the one touch option as it should. Anyone have any suggestions?

Land Rover One Touch Indicator Upgrade from BRITPART [DA2868]

Land Rover One Touch Indicator Upgrade from BRITPART. Product Code DA2868. Defender

www.brookwell.co.uk

 

Attachments

• 
  IMG_4648.jpeg

  287.8 KB · Views: 9
• 
  IMG_4649.jpeg

  171.5 KB · Views: 9

miktdish

Guns n Chainsaws

Full Member

• Today at 09:16

• #2

What car do you have ?

 

R

rossgillanders

New Member

• Today at 09:36

• #3

2001 Defender Td5

 

A

Anaconda

Well-Known Member

• Today at 10:11

• #4

I have never heard of such a thing, what does it do?
Edit: Blimey how much!

 

miktdish

Guns n Chainsaws

Full Member

• Today at 11:33

• #5

I saw that too, over £100 - FFS
So that your indicators flash 3 times and then stop ....
You can get a new pair of rear springs for less than that or a pair of shocks, a full set of Timkin bearings and Corteco seals for the axles ....
Anyway, I presume what it does is send three pulses of 12V at the indicator - the signalling is via the circuit board (wrapped black) and needs a 12V power supply from the two white connectors.
If there are no matching connectors (for the 12V) then likely it doesn;t fit your particular MY

 

Last edited: Today at 13:44

meego

Well-Known Member

• Today at 11:44

• #6

miktdish said:

I saw that too, over £100 - FFS
So that your indicators flash 3 times and then stop ....
You can get a new pair of rear springs for less than that or a pair of shocks, a full set of Timkin bearings and Corteco seals for the axles ....
Anyway, I presume what it does is send three pulses of 12V at the indicator - the signalling is via the circuit board (wrapped black) and needs power from the two white connectors ??

Click to expand...

Bit of a nonsense. It does say it’s plug and play, but is that for a TD5 or something newer

 

D

davy206

New Member

• Today at 14:40

• #7

12v supply from back of the cigarette lighter

 

Attachments

• 1c7omjg7p_956252.pdf

  172.5 KB · Views: 8