bhobw
Member
Hi all,
I'd appreciate some opinions on this one. I changed the oil in my 200TDi yesterday along with the oil filter. Messy job!
As far as i was aware the capacity is 6ltr. I put the best part of 5 ltr of 10W40 back in thinking that maybe not all of the oil drains out (especially since I had the front jacked up when changing).
I let the engine tick over for 10 mins then left it to settle so I could see the level on the dip stick.
This morning the dip stick is black (dirty oil still?) way up over the HI mark. After cleaning the stick and rechecking a few times, it's the same. I'm now worried that I've overfilled the oil and that there was too much old oil still in the engine when I added the 5 ltr.
What do you think?
And what should I do?
Thanks
BHOBW
I'd appreciate some opinions on this one. I changed the oil in my 200TDi yesterday along with the oil filter. Messy job!
As far as i was aware the capacity is 6ltr. I put the best part of 5 ltr of 10W40 back in thinking that maybe not all of the oil drains out (especially since I had the front jacked up when changing).
I let the engine tick over for 10 mins then left it to settle so I could see the level on the dip stick.
This morning the dip stick is black (dirty oil still?) way up over the HI mark. After cleaning the stick and rechecking a few times, it's the same. I'm now worried that I've overfilled the oil and that there was too much old oil still in the engine when I added the 5 ltr.
What do you think?
And what should I do?
Thanks
BHOBW