Went to replace my starter motor today.
Couldn't remove the battery box as the front bolt into the plastic clamp turned but didn't come out. Paused to contemplate options. :scratching_chin:
Then I noticed an oil build up on the back of the front rocker cover. I knew I had a leak but I've replaced that gasket so didn't think it would be there. However there is a lot of oil in the PCV pipe, which I previously broke at the T connector and bodged - thought it was ok but maybe a vacuum leak is causing the oil to enter - no idea how it works really! Slapped myself and ordered a new one.
Got my iPhone OBDii app working. Picked up P0420 (Catalyst System Efficiency Below Threshold) which I knew about anyway, although I'm not sure what causes it.
Then I noticed that one of the bolts on the large auxiliary belt pulley is touching the nearby engine mount bracket (see pics). That can't be good surely! Is there some adjustment whereby I can move it away slightly? Can any V6 owners confirm that this is in the right position, and that the bolts are the right ones? They look like B&Q bolts to me!
Couldn't remove the battery box as the front bolt into the plastic clamp turned but didn't come out. Paused to contemplate options. :scratching_chin:
Then I noticed an oil build up on the back of the front rocker cover. I knew I had a leak but I've replaced that gasket so didn't think it would be there. However there is a lot of oil in the PCV pipe, which I previously broke at the T connector and bodged - thought it was ok but maybe a vacuum leak is causing the oil to enter - no idea how it works really! Slapped myself and ordered a new one.
Got my iPhone OBDii app working. Picked up P0420 (Catalyst System Efficiency Below Threshold) which I knew about anyway, although I'm not sure what causes it.
Then I noticed that one of the bolts on the large auxiliary belt pulley is touching the nearby engine mount bracket (see pics). That can't be good surely! Is there some adjustment whereby I can move it away slightly? Can any V6 owners confirm that this is in the right position, and that the bolts are the right ones? They look like B&Q bolts to me!
Attachments
Last edited: