adam300tdi
Active Member
does any body no the part number for the bearing in the pulley or just the pulley for the fan belt tensioner.cant find it on paddocks.i did have one but ive lost it and i dont realy wana buy the hole adjuster
adam300tdi
Active Member
i can only find the 1s for the cam belt
tombardier
Well-Known Member
have you done the penny trick yet?
adam300tdi
Active Member
not yet.il do it wen ive sorted the pulley
adam300tdi
Active Member
ive found the part on ebay.wunt mind getting it from paddocks tho so its next day delivery and here for saturday.does any one no if they do it
tombardier
Well-Known Member
The penny trick might negate the need to replace the bearing? also, are you sure it's not just a crap belt? does the sqealing stop if you spray a bit of wd40 on to the ribbed side of the belt whilst it's running?
Recently done mine its a 6203 2rs (x2 rubber seals) all bearing suppliers will have them in stock its a fairly standard bearing.. they should only be a couple of quid try and get a Timkin or FAG if poss. I had to grind a small notch behind the circlip groove to be able to get the circlip out (I tried for ages to lever it out and it wouldn't come) and then guess what ? It still squealed like a budgie on speeeeeeeeeeeed ... then out come the penny no more sqealing birdy ... theres a great thread somewhere about doing the bearing ,only took 20 mins or so
Good luck
adam300tdi
Active Member
doesnt matter ive found the 1 i thought id lost.guna fit that a new belt and do the penny trick wile im at it
