B

bluesticky1

New Member

• Aug 22, 2010

• #1

My Disco 2 Td5 has recently developed a quiet grinding noise when turning right. Does anybody know what this is, and how to fix it?

I'm guessing it's the big ball shaped CV joint by the offside front wheel, but only makes it when mving so can't get under and check.

 

V8_Disco

New Member

• Aug 22, 2010

• #2

cv joint, change it before it breaks for good

 

B

bluesticky1

New Member

• Aug 22, 2010

• #3

Thanks mate, I'll start saving!!

 

B

bluesticky1

New Member

• Aug 23, 2010

• #4

Is replacing CV joints a DIY job for a relative novice mechanic, or am I better paying a specialist?

 

sierrafery

Well-Known Member

• Aug 23, 2010

• #5

bluesticky1 said:

Is replacing CV joints a DIY job for a relative novice mechanic, or am I better paying a specialist?

Click to expand...

.....with a bit of muscles(or a compressed air tool)....procedure from RAVE and the proper spanners + some stubbornness.... it's quite easy. I did it myself and my field is the electrics/electronics not the brute mechanic jobs.

 

B

bluesticky1

New Member

• Aug 23, 2010

• #6

sierrafery said:

.....with a bit of muscles(or a compressed air tool)....procedure from RAVE and the proper spanners + some stubbornness.... it's quite easy. I did it myself and my field is the electrics/electronics not the brute mechanic jobs.

Click to expand...

Brute force is my specialty, it's the fine fiddly stuff I struggle with. That's why I thought the Disco would suit. You should see the mess I made of my alloy bike engine. Thank the lord for helicoil.....:doh: