craigmidlands
Active Member
Help needed on tracing the lack of power to the above items.
I've followed the wiring diagram for a series 3 with reference to the power supply and have traced it back to the regulator at the back of the clocks which is a solid dark green wire. There is no powere there hence none to the gauges.
However, when trying to trace the said green wire back, it goes into the loom and i cant find where it goes from there. The wiring diagram says it goes to fuse labelled 7-8 but that is ok so i'm guessing there is a fault somewhere between the two.
Can anybody help me in telling me where the dark green wire goes when it enters the loom please so i can trace the fault.
I've followed the wiring diagram for a series 3 with reference to the power supply and have traced it back to the regulator at the back of the clocks which is a solid dark green wire. There is no powere there hence none to the gauges.
However, when trying to trace the said green wire back, it goes into the loom and i cant find where it goes from there. The wiring diagram says it goes to fuse labelled 7-8 but that is ok so i'm guessing there is a fault somewhere between the two.
Can anybody help me in telling me where the dark green wire goes when it enters the loom please so i can trace the fault.
