N

naughtyboy

Active Member

• Jan 22, 2012

• #1

my 200tdi 110 as got no flash.
std lights work as do full beam but no flash function.
seem to remember seeing on mates that the two relays are linked but cant remember which two wires.
got to point in rolling rebuild of scratch building new loom as original one as been so hacked about by prev owner that lights had been wired with no relays when i got it so put in two as first job when i got it 6yrs ago.

 

philvy

Well-Known Member

• Jan 22, 2012

• #2

i got him:

 

tombardier

Well-Known Member

• Jan 22, 2012

• #3

There is a wire at the base of the full/dip beam / indicator stalk. Get the steering column cover off and have a look if that wire's connected/corroded or whatever

 

mick the builder

Well-Known Member

• Jan 22, 2012

• #4

I had a similar problem a few weeks ago but i also had no full beam. A wire had come away from the back of the flash stalk. I thought i was going to have a pig of a job finding the fault but got lucky. Mine to has had the loom chopped to bits with live take off,s and scotch locks. Good luck

 

N

naughtyboy

Active Member

• Jan 23, 2012

• #5

after doing mates series from scratch last month with new fusebox and relays this will be pce of cake.