Dr_evil

Dr_evil

Banned
Testing the water really........I could do with running an LT95 as I'm using a very powerful engine now which is pushing close to 500ft/lbs of torque :eek:


This box was rebuilt by AW Transmissions and was going to be used in my own build, it has new bearings, the teeth are perfect, new synchros and new oil seals.

All parts on the box are brand new and its ready to fit with the stumpy release bearing.

Perfect if your LT77 is FUBAR, you're making a hybrid and need to save space or you want a 5 speed set up in a series landrover as this is pretty short!



£750 OBO is my price as a lot of works gone into this box! This will include delivery too and just as an idea.......Ashcrofts price is £1194.00 for this!
 
Last edited:
Yeah its down to V8 size so it'll fit anything!


If its going in a diesel I'm more than happy to supply a roller bearing spigot or a custom turned bronze one


Up for sale as I've found a stash of LT95 short pinions and bellhousings and want to buy one
 
Depends how much really some people want sill money. I have a mate in scotlandshire has new pinions boxed wrapped from an ex MOD auction for £30ea but postage is mad so waiting until he pops down. Bellhousings were £100 but I think I know where a couple are locally cheaper
 
I'll email him for a pinion he had like 10 of them they were advertised for £120 ea but I've known him a while bell housings I found online ages ago but think I can get a better deal
 
I found bellhousings for £154 and pinions for about £140 but yeah thanks if he's got pinions I'll take one if its cheap! Could go halves on postage to make it cheaper then I can send it down to you as it'll be cheaper from me to you than from him to you
 
Yea I'll ask if he is ok to post. He isn't keen something to do with his village postr office but i'll ask again. The deal was as i left it he is bringing a load of stuff down when he comes this way and I have a load of series bits for his motor to take up.
 
Fair enough, I may keep the R380 in that case if its cheaper! Only a couple weeks worth of work for me to get a few hundred for those bits he's got and a master rebuild kit for the LT95


Definitely be a better option as it'd take the abuse of the 429!
 
jai_landrover said:
Yea I'll ask if he is ok to post. He isn't keen something to do with his village postr office but i'll ask again. The deal was as i left it he is bringing a load of stuff down when he comes this way and I have a load of series bits for his motor to take up.
Click to expand...

with the postage side of things i have found paisley couriers to be very good for vehicle parts (and very cheap). im sending parts to germany with them in the next few days.
also if your scottish friend needs series parts that you dont have, i have a shed full of series 3 bits im trying to clear as need space for a series 2 rebuild
 
Can you tell me how short it is as I have an 80" v8 running a series box that I would like to replace with a better setup.
 
Using a GM SM465 gearbox mated to the LT230 using a sleeve on the output shaft


This needs to go!


The 465 has a crawler gear too 6.5:1 in first so no need for low really
 
Dr_evil said:
Using a GM SM465 gearbox mated to the LT230 using a sleeve on the output shaft


This needs to go!


The 465 has a crawler gear too 6.5:1 in first so no need for low really
Click to expand...

Is tht using the same rear sleeve/adaptor that's on the 3 speed autos?? I am clueless with septic tank boxes
 
Possibly, output is 32 spline so will see when it arrives! If not I'll sort something with the local gearbox guy as he can cnc cut something
 
You must log in or register to reply here.

Similar threads

Skolmate
Defender 200tdi LT77 noise and rebuild
Replies
13
Views
2K
dag019
dag019
dag019
A question of gearboxes
Replies
16
Views
2K
Skolmate
Skolmate
J
Clicking noise from r380 gearbox
Replies
0
Views
451
Jamie Gigg
J
pikefly
New Gearbox
Replies
10
Views
1K
steve2286w
steve2286w
Britcyclerider
R380 Stumpy Gearbox for sale
Replies
2
Views
2K
nobber
nobber