Shimsteriom
Master Procrastinator
Welcome to LoonyZone 
brianp38dse
Well-Known Member
Hello and welcome
TD5Tom
Active Member
It would be good to get together on afew lanes got to get the disco sorted mechanical wise it's hard atm with the weather we are having to get under it to sort afew thing what have you got?
RangeRoller dt
Well-Sprung Member
He can’t go far without water so itl have to be raining
Discos can handle all sorts of Laning and abuse, get yourself a good welder
Welcome too
Discos can handle all sorts of Laning and abuse, get yourself a good welder
Welcome too
Nah the water is sorted now!! I've found its best if i leave it in its solid form, it can't leak out then!!He can’t go far without water so itl have to be raining
Discos can handle all sorts of Laning and abuse, get yourself a good welder
Welcome too
I've got a p38 range rover with an engine that's seen better days. Will probably put a replacement in when/if the weather gets nicer. Until then it's like driving a series, temperature wise
RangeRoller dt
Well-Sprung Member
wonder if you’ll find anymore of that gunk?
Hopefully this year will see you sorted, I had same issue with my P38 I replaced the whole cooling system. Luckily it wasn’t the head and the doozle system is so much more user friendly
Hopefully this year will see you sorted, I had same issue with my P38 I replaced the whole cooling system. Luckily it wasn’t the head and the doozle system is so much more user friendly
Nah I've driven it loads now with no issue since i put the broken thermostat back in which means it rarely gets above 60c!! Once when it was freezing it barely got above 50c.. that didn't do the mpg any good. I'll leave it until spring, at least i can get some use from it! And i know it's no good to run an engine cold, but it's already broke
RangeRoller dt
Well-Sprung Member
drive it and enjoy it is what it’s all about, they all play up, we are all here to keep each other going
So truedrive it and enjoy it is what it’s all about, they all play up, we are all here to keep each other going
TD5Tom
Active Member
Don't worry I have 2 welders and have previous experience on a disco 1 hahaHe can’t go far without water so itl have to be raining
Discos can handle all sorts of Laning and abuse, get yourself a good welder
Welcome too
RangeRoller dt
Well-Sprung Member
One has chassis rot, other has body rot.
Can never remember which is which - you can deduce from what you got
Can never remember which is which - you can deduce from what you got
TD5Tom
Active Member
I'd much rather the chassis cause there is a lot of places on the discovery 1s body rot I know that the discovery 2s have rear chassis rot I hope it not to hard to weld a rear half chassis on if and when I will need one does anyone no of any decent rust remover or rust converters that can help it survive.
RangeRoller dt
Well-Sprung Member
Yes.
Dinitrol is a favourite.
There’s decades of threads on the issues in the Discovery section. Use the searchbar when in there. If you make a thread with a few snaps of your woes there’s many members that will offer you all kinds of help and advice. Take a gander
Dinitrol is a favourite.
There’s decades of threads on the issues in the Discovery section. Use the searchbar when in there. If you make a thread with a few snaps of your woes there’s many members that will offer you all kinds of help and advice. Take a gander
