ant.7
Active Member
hi all
just joined your forum after buying my first land rover, a discovery 1996 300tdi.
what an experience it has been, on getting the disco home i began ripping it to bits, i knew it needed new outer sills on both sides, but what i didnt know was the rest,
both the inner and outer sills on both sides were needed as were the following,
2 rear wheel arches
new boot floor
new front inner wing drivers side
a rebuilt rear inner wing plus numerous other plates welded in place.
a new rear section on the exhaust
4 track rod ends
4 ball joints
1 donut
numerous bushes.
A lot of work but well worth it as the disco only cost £600.
i really enjoyed working on the disco and have just driven it down to north wales for a holiday and the drive was superb.
im hooked on my disco and cant wait to start playing and adding bits to my new toy!!
just joined your forum after buying my first land rover, a discovery 1996 300tdi.
what an experience it has been, on getting the disco home i began ripping it to bits, i knew it needed new outer sills on both sides, but what i didnt know was the rest,
both the inner and outer sills on both sides were needed as were the following,
2 rear wheel arches
new boot floor
new front inner wing drivers side
a rebuilt rear inner wing plus numerous other plates welded in place.
a new rear section on the exhaust
4 track rod ends
4 ball joints
1 donut
numerous bushes.
A lot of work but well worth it as the disco only cost £600.
i really enjoyed working on the disco and have just driven it down to north wales for a holiday and the drive was superb.
im hooked on my disco and cant wait to start playing and adding bits to my new toy!!
