300bhp/ton

300bhp/ton

Well-Known Member
Any tips or pointers on good ways to change these? Access looks pretty horrendous. Got new plugs, leads and coil packs ready to go on.
 
They do come out through the gap on the RHS, easier if you can get the leads off first.
It's a bit of a wiggle and make sure you have plasters at the ready
 
Mine has had part of the backing plate cut away so there's only one (right hand) bolt holding it in place. Wonder if that helps...
 
I pull the upper intake off makes life easier especially if you have large hands.

If you have woman hands it might be slightly easier.
 
If you have SAI plumbing like I do on my Disco 2 it’s a PITA! The intake manifold will have to be removed to replace the packs.
Just follow what @kermit_rr mentioned and you can’t go wrong.
 
Last edited:
biketeacherdave said:
Pull the intake manifold off, your gonna hate your self if you don't and you get those leads in the wrong place
Click to expand...
I could probably do it with my eyes closed now!! Though probably wouldn't make much difference as you can't see buggerall anyways!!
Not put them on wrong yet, getting them off is the hard part
 
I would recommend tagging all the plug wires and making a diagram showing where they go.
Had a devil of a time getting them right when I changed my packs.
 
2Q==(1).jpg
 
Yep. This pic was from last year when the boot ripped while making the HT leads and lining them up for installation.
 
You must log in or register to reply here.

Similar threads

M
Classic Range Rover Suffix D Starting Issues - Advice required please
Replies
6
Views
1K
Datatek
Datatek
Rubberknees
Do I need a new driver pack
2
Replies
38
Views
2K
Rubberknees
Rubberknees
ROBinBORO
Other Freelander 2 TD4
Replies
0
Views
206
ROBinBORO
ROBinBORO
M
L-Series Injectors & Glow Plugs
Replies
6
Views
495
mandelbug
M
Blob
L322 Brake replacement opinions, Brembo discs? Yellow Stuff pads? What do you run?
Replies
3
Views
304
BIGrabbit100
B