Learn how to use it before you start changing anything, make a note of what has been changed and it's original setting. Or you can cause yourself a lot of pain. Visit the site and read up on it. Use the emulator.
Datatek
Well-Known Member
+1^^^^ use your phone to photograph the settings before you make changes.
Tenebreaux
Well-Known Member
Can't you export data to an sd card? Haven't done it myself but I'm sure I remember seeing the option.
Datatek
Well-Known Member
Probably, but I do not have a Nanocom so do not know for sure, I have a Faultmate and I find it easier to photograph the screen data.
RangeRoller dt
Well-Sprung Member
save live data on a run. You need a particular card to work with it.
Grrrr will know the particulars.
Wot he said
Totally agree listen to what wammers is saying to you
brianp38dse
Well-Known Member
+1 or the next thread will be ( ive buggered the settings up how can i sort it)
Had a read of the manual,couldn't see much on cards.
any more info on best card to use?hopefully i'll have a suitable one here
Datatek
Well-Known Member
Immobiliser is a simple on or off setting in the BECM, turn off EKA while you are in there. You have to "save" after you make the changes for them to take effect.
JUKE179r
Well-Known Member
If you have Motronic V8 with cruise control (CC), make sure you have the correct CC tune file for your RR's Hella CC unit...
1) First, check the main throttle cable and CC cable on the engine have the correct gap per the RAVE manual.
2) Make sure to press the CC switch on and then start engine.
3) While the engine is running, connect your Nanocom.
4) From the Nanocom home screen press R-ROVER P38 > MOTRONIC > HELLA CC > SETTINGS > scroll to the last page > under "Vehicle Tune", select your specific engine > then click on "WRITE SETTINGS".
More info on the Hella CC unit... https://www.nanocom-diagnostics.com/downloads/preview/hella-cruise-control
1) First, check the main throttle cable and CC cable on the engine have the correct gap per the RAVE manual.
2) Make sure to press the CC switch on and then start engine.
3) While the engine is running, connect your Nanocom.
4) From the Nanocom home screen press R-ROVER P38 > MOTRONIC > HELLA CC > SETTINGS > scroll to the last page > under "Vehicle Tune", select your specific engine > then click on "WRITE SETTINGS".
More info on the Hella CC unit... https://www.nanocom-diagnostics.com/downloads/preview/hella-cruise-control
OP has a diesel.
JUKE179r
Well-Known Member
Welp… disregard then.
i've a diesel.sorry should have said in my opening post
