vihippo

vihippo

Member
Hi everyone,
Anyone know what the technical name is and if I can just order this one part?
Looks like it could be a generic Dorman Tee coupler that uses normal hose clamps.

Just had this tiny plastic piece fail. Just need to replace it as the hoses are still really good. ( had the coolant system completely overhauled 3 years ago ). Thanks! :)

EDIT: Guess I should state its for a V6 auto trans.

PCH000232.jpg

Not sure if it's ok to hotlink images here. Mods let me know and I'll move it the gallery.
 
Last edited:
The T only comes with the hoses iirc. You might be able to find an equivalent. Measure the tales and do a search ;)
 
Andythedrum said:
Mine has failed too (see pics) but it looks like I'll have to bite the bullet and replace the whole hose. About £55 plus VAT! https://www.famousfour.co.uk/new_parts/ff_part?part=5765

However there is one going on ebay for £30!
http://www.ebay.co.uk/itm/Land-Rove...hash=item5423a0f437:m:mQNI_76OhpBjsC7AiHYUKOg

But if you do find that 3-way plastic insert for sale anywhere, please let me know!

View attachment 96921 View attachment 96922
Click to expand...

In you pics above that looks like to be the breather hose that joins onto the vis motor .
http://www.brit-car.co.uk/search.ph..._type=&xSupplierID=&product-sort=&xPerPage=10

https://www.lrdirect.com/LLH102660L-supplied-by-LAND-ROVER-branded-LAND-ROVER.html
This is for the radiator top hose.
http://www.brit-car.co.uk/search.ph..._type=&xSupplierID=&product-sort=&xPerPage=10
http://www.island-4x4.co.uk/hose-radiator-eurospares-pch000232-p-25321.html
 
Andythedrum said:
Ah sorry! They looked the same to me. Thanks for the correction. At least I'll be buying the correct one now! ;)
Click to expand...

No problem you are welcome I always keep spare for both, as I also have a MGZT 190 which takes a similar breather hose, it differs only at the end which fits into the throttle body, to remove the hose press in the red collar, and the black collar on the throttle body.
rkn535.jpg


2i97drk.jpg


2130j7p.jpg


2rg2kya.jpg


20ix835.jpg


1z57qqt.jpg


Photos from when I changed my thermostat on the V6 through key hole method
 
Thanks Artic2!
Got something on order from the local auto parts place. I was worried about engine temps melting plastic so I found a generic heater part with similar dimensions.
Hopefully it'll get here this week.
Thanks again
 
You must log in or register to reply here.

Similar threads

D
K Series Guide/ Build Log
Replies
7
Views
3K
DanielG
D
L
Disconnecting Upper Radiator Hose (in Botwsana)- HELP!
Replies
12
Views
1K
Leo Bedford
L
swank1975
Classic Rover Trans Cooling Line DIY replacement using AN lines
Replies
3
Views
1K
swank1975
swank1975
Alibro
Clutch change in a TD4 (list of jobs to do)
2
Replies
30
Views
14K
NUM427F
N