sirwingalot

Active Member

• Jul 6, 2012

• #1

Well after a year of work, most of it with in the last 2 weeks, since the council told me to move it or loose it, the disco is ready.... MOT is in a few minuets. Not too worried - MUCH! OH well time to go. I'll let yall know if I can be joining you on the road soon! *whimpers*

 

Bump

Well-Known Member

Events Planner

• Jul 6, 2012

• #2

sirwingalot said:

, most of it with in the last 2 weeks, since the council told me to move it or loose it,

Click to expand...

you got 2 weeks?! I got "move it NOW or we'll remove it... despite it being MOT'd and taxed and insured.

Good Luck

 

sirwingalot

Active Member

• Jul 6, 2012

• #3

Well all the luck in the world, and its was all a waste of time in the end. It has failed on so many counts, its not even funny. I think this is the end of the road. I'm off to top myself! Bye!

 

ratty

I'm not special I'm limited edition

• Jul 6, 2012

• #4

sirwingalot said:

Well all the luck in the world, and its was all a waste of time in the end. It has failed on so many counts, its not even funny. I think this is the end of the road. I'm off to top myself! Bye!

Click to expand...

Major or minor bits?

 

G

gas

Well-Known Member

• Jul 6, 2012

• #5

sirswingalot you still there

its not worth it

 

sirwingalot

Active Member

• Jul 6, 2012

• #6

No, your right, its not worth it. Its not worth the damn effort, and the hundreds of hours I've put into the thing to only be told my welding is sub par and the bits I haven't welded either need welding or replacing. In total 16 fails, over 3 sheets. Total waste of a year.

 

300tdistu

Well-Known Member

• Jul 6, 2012

• #7

your welding must be bad, grind it all back

get some scrap metal and practice, play with the power setting and wire speed till you get it right

what welder are you using ??

 

livers

Well-Known Member

• Jul 6, 2012

• #8

300tdistu said:

your welding must be bad, grind it all back

get some scrap metal and practice, play with the power setting and wire speed till you get it right

what welder are you using ??

Click to expand...

Got to agree ^^^^^
Plus a lot of testers will accept a panel replacement with puddle welds if originally spot welded, but will reject a patch unless perfectly seam welded all the way round ( no appropriate smilley ) feckin amateur cowboys wiv a NV EFFIN Q