gR@HaM

gR@HaM

Well-Known Member
It has been an epic journey, but finally I have finished de-rusting and prepping the rear end of me discoovery and tonight I made a start on the painting :) :) :)
First coat done. Am being carefull but not overly anal with the 'ol brushing and have already managed to get some of the black stuff on small areas of chassis mounts, shock mounts, brake lines.
This led me to the question - are there any components which must not be painted in order to get through MOT. Ball joint rubbers would be the obvious as this would be covering up splits but is there anything else I need to avoid? Tis a bit tricky when you have sausage fingers like me...
 
i normally spray all over the place, <all over her tits is best> but disks are a no no try to avoid rubber components as it will look ****e
 
Keep it off the flexible hoses I would. Otherwise, just spray it all over. Why not waxoyl it instead? Waxoyl is OK on everything!
 
i waxoyled all the under side tryed to keep off the engine gearbox prop shafts brakes and exhaust but got an advisory on mot "heavily undresealed"
 
G-man said:
see i tell you my tricks, pretty women do it with revealing clothes, me being an oddball landrover owner hump legs, i go see my mate and he advises me what he needs me to do to him... i do it then i get an MOT certificate :D
Click to expand...
:p
 
You must log in or register to reply here.

Similar threads

M
To buy or not to buy
Replies
14
Views
1K
Malpas
M
Chockster
Paint recommendation for nato green
Replies
11
Views
2K
Dippypud
Dippypud
Walshie1987
L322 Battery Drain - 2 nights and dead, tried everything I can think off....
Replies
16
Views
3K
rich28uk
rich28uk
MollyNomad
TD4 SAGA!
Replies
6
Views
1K
MollyNomad
MollyNomad
D
Paint adhesion - best method for axles and chassis etc
Replies
3
Views
2K
Dr Strangeglove
D