200tdi ayre

200tdi ayre

Well-Known Member
whats your opinion on the hardest job to complete on a landrover ? whether its skill wise or just a pain in the ass job ?
mines probably removing the steering drop arm, tried on 2 different 90's and was impossible, pullers heat hammer none worked :doh:
 
So far it's rebuilding the gearbox. Every step has been problematic. Now at 1 month and counting.
 
most jobs on a landy turn into a nightmare :D you think to yourself,it will only take me 10 mins,3 hours later your still at it! :eek:
 
That's an easy job :(. Normally 3 hours later, I am still not ready to start the job I intended. Usually only half way thru the 8 other jobs I am required to do before starting the one I intended :mad:
 
Convincing ya fellow Landy owners That ya gaylander is good offroad.. :D Or even just Good Fullstop..... :eek:
 
driver door latch on a 2door rrc or removing all the rust and making sure none comes back :p
 
seat belt mounts tie bars done mine today after bodylifting,what a pain in the arse,but then most things are when your lying on your driveway.lol
 
Tbh boys not really had to do a really difficult job, that's why I love land rovers.

I agree though if I had to choose, drop arm is a real tough cookie.

One never came off, even after a big man and a big press had a go.

My last means though came off on its own :D (tbh if you want to loosen it, undo nut and drive a bumpy lane!)

Cheers
 
its more the fact you have to do them late at night in the road in the dark in the winter in a rush thats the main issue for most of us :doh: :p
 
driving the series 3 straight on road, not curving or correcting all the time. and changing seal on transferbox main shaft. no i mean the gearbox also.
 
getting the bonded windscreen out of a disco 2 without cracking it !!!

patience it parramount during this and a lot of steel wire :D:D:D:D:D
 
You must log in or register to reply here.

Similar threads

D
K Series Guide/ Build Log
Replies
7
Views
3K
DanielG
D
Alibro
Clutch change in a TD4 (list of jobs to do)
2
Replies
30
Views
14K
NUM427F
N
I
drop arm removal - try this before cutting it orf!
Replies
5
Views
1K
jamesmartin
jamesmartin
Irishrover
'02, TD4, Rear suspension full overhaul
Replies
4
Views
2K
Irishrover
Irishrover
C
BMW V8 M62TUB Coolant Temperature Reduction using a lower temp thermostat
2 3
Replies
44
Views
24K
holidaychicken
holidaychicken