hi guys i have mk 3 2003 range rover 4.4 v8 with bmw engine can any body tell me how to do manual reset on service panel as it is showing
-25 thank you for any help .

Could try this

Service light reset – 2002 to 2004

1) Procedure to check/reset service status – Distance counter
•Switch ignition OFF
•Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed.
•Has the ‘Reset Distance’ limit been reached or exceeded?
NO - Follow instructions in section 2 below YES - Follow ‘Reset Distance Counter’ instructions below
Reset Distance counter procedure
•Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
•To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
•The LCD will display ‘END SIA’. Switch ignition off

2) Procedure to check/reset service status – Date counter
•Press left instrument panel reset button once
•The LCD will display ‘RESET SIA’ followed by the service due date.
•Has the ‘Reset Date limit been reached or exceeded?
NO – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the service interval check/reset procedure has been cancelled. YES - Follow ‘Reset Date Counter’ instructions below
Reset Date counter procedure
•Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
•To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
•The LCD will display ‘END SIA’. Switch ignition off

Saint.V8 said:

Could try this

Service light reset – 2002 to 2004

1) Procedure to check/reset service status – Distance counter
•Switch ignition OFF
•Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed.
•Has the ‘Reset Distance’ limit been reached or exceeded?
NO - Follow instructions in section 2 below YES - Follow ‘Reset Distance Counter’ instructions below
Reset Distance counter procedure
•Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
•To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
•The LCD will display ‘END SIA’. Switch ignition off

2) Procedure to check/reset service status – Date counter
•Press left instrument panel reset button once
•The LCD will display ‘RESET SIA’ followed by the service due date.
•Has the ‘Reset Date limit been reached or exceeded?
NO – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the service interval check/reset procedure has been cancelled. YES - Follow ‘Reset Date Counter’ instructions below
Reset Date counter procedure
•Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display.
•To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times
•The LCD will display ‘END SIA’. Switch ignition off

Click to expand...

all sorted thanks for the help saint