bustersbus
Well-Known Member
bustersbus
Well-Known Member
Sent ye a pm, did ye get it?
stevieb42
New Member
Aye ah've got one, ye can have it fur nowt if ye want
givin bits away .. you`ll give us scots a bad name
bustersbus
Well-Known Member
stevieb42
New Member
bustersbus
Well-Known Member
Aye probably in a couple of years time when ah do up me new yin!! Ye're supposed tae learn from yer mistakesbet ya need it once you`ve got rid o`it
Right, ah'm off ta bed, ah'll catch ye's anon
stevieb42
New Member
lightweightAye probably in a couple of years time when ah do up me new yin!! Ye're supposed tae learn from yer mistakes
Right, ah'm off ta bed, ah'll catch ye's anon
bustersbus
Well-Known Member
No much the now Stevie, the missus has got me emptyin' oot the spare room fur decoratin'!!!not had any updates for a while , whats happening with the new bus
Ah think the only things that ah've swapped just now are the wheels (wolf rims), the injector swill pipes and taken off the bell housin' cover as a template fur the new bulk head. Could've dun tae get the dash out to see what ah'm needin' tae cut/fill/move on the bulkhead and then ah can get on wi' paintin' it.
Was also hopin' tae get the axles off and tarted up with new swivel balls, s/s brake pipes etc (the front one's had new calipers fitted not so long ago and the back's had a new diff fitted) then ah can swap them ontae mine
once ah get mine sorted out, then ah'll probably have a go at doin' up the new one
defenderdavie
New Member
have you replaced that bulkhead with the little whole yet
cos im going to try taking one out and replace it with a bar
if it comes out in one peice you can have it if its any use to you
might even meet you at moffat with it as im down that way most weeks
cos im going to try taking one out and replace it with a bar
if it comes out in one peice
you can have it if its any use to you might even meet you at moffat with it as im down that way most weeks
defenderdavie
New Member
ps its out of a 96 N 110
bustersbus
Well-Known Member
Howsit goin' Daviehave you replaced that bulkhead with the little whole yet
cos im going to try taking one out and replace it with a bar
if it comes out in one peice
might even meet you at moffat with it as im down that way most weeks
Nah, haven't got round to it yet as need to do stuff tae the bus first. Ah'll get there tho' Just bin for a look at the back bulkhead, and dunno if it's hard or easy to take out. Loooks like there might be a bit of drillin' oot the spot welds and cuttin' round the wheel boxes (unless sumbody knows diffrunt
)Here's a couple o' pics, hopefully ye can see the spotwelds and the rivets are where the boxes are...
http://i266.photobucket.com/albums/ii264/bustersbus/backbulkhead001.jpg
http://i266.photobucket.com/albums/ii264/bustersbus/backbulkhead002.jpg
http://i266.photobucket.com/albums/ii264/bustersbus/backbulkhead003.jpg
Let us know how ye get on Davie and ah might take ye up on yer offer if it's no too mangled
defenderdavie
New Member
im hoping the bulkhead replace ment bar comes wi instructions
ive seen 90s with it done but not a 110
ill keep to informed
itll no be till after easter or maybe even easter weekend
ive seen 90s with it done but not a 110
ill keep to informed
itll no be till after easter or maybe even easter weekend
Pikey
Dummy Ejection Facilitator..
It dint take the whole bulkhead away. It leaves about 6" at each side, and about 2" above the seatbox. Ask Trewy I think he's got pics of his MudStuff bar.
bustersbus
Well-Known Member
Aye cheers Davie
Should be ok on the 110 accordin' tae this lot...
Protection & Performance
and found this too...
MUDSTUFF.CO.UK - Defender Bulkhead Removal Bar - Products - Have you got MUD? - Land Rover Solutions
