Done - next Q, what resistance am I supposed to see across what terminals? I've had the meter on, across all possible combinations of terminals, and the values don't change if I apply pressure (or vaccuum) to the pipe.
If engine is running and you pull the plug off the map sensor and it makes no difference then would this mean it's not working at all.
That depends on engine RPM manifold pressure and load.
I have an after market one in works fine been in 2 yearWish I had known but ordered one today , although it's a after market , hope it's ok.
Many thanks.
Thanks hope mine helps. I bought the egr by pass but every time I fit it you can't see for smoke
So hoping this and changing the sensor in the air intake makes a difference,
Although I got cheap fault reader but it came up no codes ,
Maybe I posted wrong place , it's a td4 2.0 Freelander. Sorry if wrong still finding my way around .
Cruel, but trueAh. Can see where you've gone wrong. You're looking for the Gaylander section! Just Google "pot pouri for my Landy" and you should land in the right section.![]()