mutsnutz
Well-Known Member
bloody hell thats a big nut
Grit Valve
2000 4.6 Vouge
Before you empty it make sure you can get the filler plug out!
+1....you'll be fecked if you drained it and couldn't get any back in again....
tried to remove the 32mm nut no joy its bloody solid
hit it straight on with a hammer, the jar should shock it and loosen
Grit Valve
2000 4.6 Vouge
Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise
mutsnutz
Well-Known Member
Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise
yeah not that dumb
jamesmartin
Well-Known Member
Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise
are you sure
jamesmartin
Well-Known Member
they can be very tight ,but youd want to be pushing bar toward the front
Grit Valve
2000 4.6 Vouge
are you sure
Absolutely
vertical bar lowest point that's about the right size bar! towards the rear as pictured lol you should know 
jamesmartin
Well-Known Member
Absolutely
not the same nut I know but same principle lmfao
if you push that bar rearwards it would tighten
Grit Valve
2000 4.6 Vouge
Your having a laff the supposed nut is on the passenger side work it out
jamesmartin
Well-Known Member
no its not ,r380 has drain and filler oh rh side
