chabrolly

Active Member

• May 17, 2008

• #1

hi
the center message in my p38 displayed :" low brake fuid " is that means that the brake system is gone ?
what kind of brake fluid shall i use for my p38 - 1996- hse ?
what color is it ?
thanks for help .
charbel ..

 

Trewey

Cockernee, Pasty munchin bastid.

• May 17, 2008

• #2

you may have a leak somewhere. have a good look round.
it's DOT4 fluid that you need.

 

chabrolly

Active Member

• May 17, 2008

• #3

Treworgey 90 said:

you may have a leak somewhere. have a good look round.
it's DOT4 fluid that you need.

Click to expand...

don't you think that the dead pads could cause this problem too ?
regards
charbel

 

david451

New Member

• May 17, 2008

• #4

Treworgey 90 said:

you may have a leak somewhere. have a good look round.
it's DOT4 fluid that you need.

Click to expand...

Might even be as simple as yer pads are worn right down, as they wear the pistons in the calipers move out thus taking more fluid with them, top it up then when yer change the pads and you push the pistons back in the fluid runs out the resovoir, and fooks yer paintwork, specially so if yer dunt take the cap of.

You can always wash it of with water but most dont know until the paint goes.


If no leaks and pads are not quite fooked just top up enough to get the light off.

 

chabrolly

Active Member

• May 20, 2008

• #5

the light didn't come on anymore !
till last week ..
that's strange ..
the pads still in good condition , despite they're squeaking somtimes
thanks for help .