Stickybackbob

New Member
Just about to finish off putting a new engine and box in my Disco when I found that the nut box was empty and there is still one gearbox mounting to bolt down. Anyone know what size the nuts are that hold the rubber mount to the chassis?

The car is not at my home so it would be a pain to remove the one from the other side to match it up.

Ta very muchly.
 
Looks like an M8 standard thread, mine are at the office, waiting to go under a new short engine, so going from memory.

Get nylocs if you can, better than nut and lockwasher.

Peter
 

Similar threads