ThanksYou need to check the simply stuff first like vacuum pipes for leaking. Also corrosion on the rail sensor, and for splits in the boost pipes.
The issue is with the filtering material that is used inside the filter and the internal shaping of the filter, it causes fuel to back up then when you touch the accelerator it floods file through causing a safety cut in the throttle ...basically it thinks the throttle has suddenly jammed open
Well what can I say to you.Now that's a good yarn to spin.There's no throttle on a diesel, so nothing to cut for 'safety'. A diesel is fuelled by adding more fuel, so nothing can back up.
The FL2 does actually have a throttle plate, but it's there for improved effectiveness of the exhaust gas recirculation system. It can stick shut too, but it's due to muck in the intake manifold, and nothing to do with the fuel supply system.
I was referring to the LR technician sprouting babble. I expect the throttle body needed cleaning, and he wanted to make himself look better? Possibly.Perhaps a bit of open mindedness instead of discounting what somebody else has to say.
They are. Which is why I answered his initial post the way I did.Firstly thought these forums were to help LR owners find solutions to problems !!
I bet you don't have an answer to that part do you ??
So will deal with last part first.I was referring to the LR technician sprouting babble. I expect the throttle body needed cleaning, and he wanted to make himself look better? Possibly.
They are. Which is why I answered his initial post the way I did.
This is also why I didn't really see the relevance of what the LR tech told you about your issue about the Peugeot DW12 engine fitted to your FL2, when the OP has a running issue with the BMW M47R engine fitted to his FL1. Apart from the fuel used, the 2 engine share no parts, have completely different fuel systems and are of a completely different design era, so suffer from very different issues.
Aftermarket parts, especially filters can cause issues. However they often stop fuel flowing freely, which causes starvation, which is very true on a vacuum fuel supply of the DW12, where the low pressure fuel pump is integrated into the high pressure fuel pump on the engine. There's no low pressure fuel supply monitoring, so the EDC wouldn't know there is an issue on the vacuum fuel feed system. The EDC wouldn't be able to maintain engine running, as there was fuel starvation, but it wouldn't know why.
The FL1 BMW M47R uses a pressurized low pressure fuel system, so can cause starting and running issues if the filter isn't working correctly. However the M47R EDC monitors the low pressure fuel system and cuts the engine if the low pressure supply doesn't exceed a minimum threshold.
I'm much more versed with FL1 and Rover stuff than the FL2, which is based on the Ford EUCD platform.So will deal with last part first.
Applause where applause due you obviously know your stuff.
Yes. Aftermarket filters can and do cause issues, sometimes minor fuel problems, sometimes major engine failures. I'd always recommend genuine or OE filters.But reading through your comments just sounds like your actually backing up what I've said about the fuel filter......
There's a lot to learn, especially on the modern FL2, some issues still remain a mystery even to LR technicians.I am not well versed in all things LR and very new to the ownership of said Marquee, and starting to learn fast about their individual characteristic
My point in my comment was truly to try and help the other person.
If it was an issue on my car I could see it being the cause on his.
I've heard so much BS from technicians over the years. It difficult to work out if they're being serious, or trying to pull the wool over the owner's eyes. I liken it to visiting a Dr with a particular medical issue, only to be told it's some virus. Basically he doesn't know what's wrong, so says it's a virus.As far as a tech goes he seemed a pretty genuine guy to me at a long established LR main dealer I had no reason to doubt his experience especially as swapping out the aftermarket for the genuine part solved the issue straight away.
That's understandable, with no other explanation to the contrary.As far as the actual operating systems that control and monitor the fuel supply I would have to take his information as give to me as being correct.
Possible I guess.Obviously with your input I'm a bit more educated on what happens from point A to point Z and all in-between..
Unfortunately not.Can you suggest a book or books that I could read that are in-depth into Freelander 2 mechanics and electrics that might give me more info at a more novice level to help with my own car ??
It wasn't anything to do with having a pop at you. Just what the tech told you.Finally my point on the here to help I was surprised that the forum would have somebody come down in a more novice person for trying to help but appreciate that it wasn't aimed at me but at the tech from LR
I'm not here to fall out with people i have a genuine interest in trying to find stuff our and would like to help if I can a fellow LR 2 sufferer.