bustersbus
Well-Known Member
only 1 can of stella mate?
Aye ah'm afraid so mate.... but ye should see the pile under the other bus and any available space around the garage
Aye ah'm afraid so mate.... but ye should see the pile under the other bus and any available space around the garage
buckshot
Well-Known Member
Aye ah'm afraid so mate.... but ye should see the pile under the other bus and any available space around the garage
are those springs fooked mate?
bustersbus
Well-Known Member
are those springs fooked mate?
Can't say fur sure mate but they're not cracked or owt (apart from the ****ty paint)... why d'ye ask? D'ye want them??
buckshot
Well-Known Member
could do with some for the front of the 90 (think the 1's i have are probably the originals from new
87 reg) i replaced the rear pair few years ago with + 2" hd ones so she's a tad nose low
dont know if the rear 1's you have would redress the balance or not.
my driving style tends to bottom them out now and then
bustersbus
Well-Known Member
could do with some for the front of the 90 (think the 1's i have are probably the originals from new
i replaced the rear pair few years ago with + 2" hd ones so she's a tad nose low
dont know if the rear 1's you have would redress the balance or not.
my driving style tends to bottom them out now and then
From what ah've heard, the front ones are the same as 90 rears so dunno if they're the same as yer 90's front??? But if they are, ye're more than welcome tae have them mate
buckshot
Well-Known Member
From what ah've heard, the front ones are the same as 90 rears so dunno if they're the same as yer 90's front??? But if they are, ye're more than welcome tae have them mate
sounds good mate need a courrier now i spose
dont need the shocks though bud got OME all around
bustersbus
Well-Known Member
sounds good mate need a courrier now i spose
Guid job ye don't want the shocks mate as ah cut the top of off one!
buckshot
Well-Known Member
Guid job ye don't want the shocks mate as ah cut the top of off one!
i had a set of monroe before and and when i replaced the rear axle sheared the bottom nut off FFS thats why i went to OME
bustersbus
Well-Known Member
Just bin and dug the original box out and it says... spring kit front h/d 90 corresponding to part no. DA4277
so it looks like ye should be ok fur the front mate
wickford90
Well-Known Member
is that a flat coat retriever puppy in ya truck
buckshot
Well-Known Member
no mate choc lab
wickford90
Well-Known Member
spoke to guy at mm4x4 he says it's unusual to have dodgy britpart spring,
they are 13mm different in height but when you look at the front it looks worse. sent him pics he asked for awaiting reply. tried taking measurements from chassis to various points but none seemed to be the same. is the front ****ed or is it me.
they are 13mm different in height but when you look at the front it looks worse. sent him pics he asked for awaiting reply. tried taking measurements from chassis to various points but none seemed to be the same. is the front ****ed or is it me.
Attachments
bustersbus
Well-Known Member
HAHAHAHAA! He would say that if he's sellin' them
Remember yer fuel tank and yersel' sittin' on the lower side will bring it down a bit... filled it up recently?
wickford90
Well-Known Member
in the pic 90 is empty, got 1/2 tank diesel but that should not make any difference should it, the tank is in the centre at the back
bustersbus
Well-Known Member
It shouldn't really... soz, ah thought yer tank was under the seat!
Silly question.... were the springs fitted the right way round?
buckshot
Well-Known Member
wickford90
Well-Known Member
fronts were put on front and rears on the rear. There was nothing to indicate a left or right side spring. am i missing something here?the 90 is a td5
bustersbus
Well-Known Member
What ah meant was, was one of the front springs slightly taller than the other?
Did they have any colour markings on them?
wickford90
Well-Known Member
not that i was aware of i put them next to each other and they looked exactly the same, and they were all just plain yellow, when i bought them i queried about the backs as they were only slightly taller than the originals , apparently they are stiffer and do not compress as much
bustersbus
Well-Known Member
Aye ah remember now mate... haven't looked back on the previous posts!
There is definately summit wrong as my front end never sat like that wi' the yellow springs...
