Bradderz18
Member
So how do you get into a Range Rover Vogue 03 plate with a flat battery?? I can't use the key as the door mech is broken. Any ideas welcome? Is there such a thing as being able to jump it? Without opening the bonnet
Something is leading me to suggest a jump via towbar socket, but can't recall if it's via the grey "caravan" charging socket or whether it's possible via normal 7 pin black..... hopefully somneone more sober will amble this way anon...
on the p 38, you can wedge top of door open,slide metal coat hanger down ,and hook button up?but don,t know your set up,improvise? good luckSo how do you get into a Range Rover Vogue 03 plate with a flat battery?? I can't use the key as the door mech is broken. Any ideas welcome? Is there such a thing as being able to jump it? Without opening the bonnet
Not if it is superlocked!on the p 38, you can wedge top of door open,slide metal coat hanger down ,and hook button up?but don,t know your set up,improvise? good luck
So how do you get into a Range Rover Vogue 03 plate with a flat battery?? I can't use the key as the door mech is broken. Any ideas welcome? Is there such a thing as being able to jump it? Without opening the bonnet
Och you, pedant spoilsport!!If there is a permanent live on the tow socket you can certainly trickle charge it from that but you certainly can't jump it.![]()
Alternator output is to far up the engine block and sits on the front of the unit near the belts and pulleys....no room for a jump lead - even if you could reach all the way up and get one to it.
I did wonder that which is why I asked if they were switched via the becm. I assumed that it had backfed into the 12v bus of the becm thus giving sufficient power to open the doors.Did somebody leave the lights on ??
03 L322 Front Fogs are fed through "Module Lighting Switch", so surely to power things via the bulb contacts requires the switch to be on ?
View attachment 122179
Did somebody leave the lights on ??
03 L322 Front Fogs are fed through "Module Lighting Switch", so surely to power things via the bulb contacts requires the switch to be on ?
View attachment 122179
You have RAVE for the L322?
You have RAVE for the L322?