T

themadsaxon

New Member

• Mar 30, 2010

• #1

Someone help or just buy my f£%$ing discovery!!!!!!!!!!!!
Right,my 300tdi automatic, the flex plate is in the fuel line has been bled now when i start it it will cut out unless i rev it,then when i pull away it will drive fine if a little down on power but as soon as i pull up it will cut out again does this sound like a problem anyone knows about? there is fuel up to the injector pump, the stop solinoid works but the injectors are not injecting.

 

defcrazy

Active Member

• Mar 30, 2010

• #2

first have you removed, changed anything ( fuel lines etc) check that first then try slacking the injector lines on the injectors then crank it and see if there is fuel coming out of the injector pump to the injectors . if no then there is a prob (cloged filter , sedeimenter if yes and it still cuts out then you may be sucking in air in the fuel system . check for rusted lines or leaks and kinks in the line

 

T

themadsaxon

New Member

• Mar 30, 2010

• #3

I've had the engine out to replace the flex plate, there is no diesel coming out the injectors, it's definatly at the pump and the stop solinoiud works fine. So possibly a blockage?

 

defcrazy

Active Member

• Mar 30, 2010

• #4

themadsaxon said:

I've had the engine out to replace the flex plate, there is no diesel coming out the injectors, it's definatly at the pump and the stop solinoiud works fine. So possibly a blockage?

Click to expand...

may be a blockage in the lines lift pump or in the injector pump but was it doing that before you took the engine out ??

 

robint

Well-Known Member

• Mar 30, 2010

• #5

are you sure you tightened all the nuts back up from the injector pump ? weve done it took fooking ages to resolve it

 

T

themadsaxon

New Member

• Mar 30, 2010

• #6

No it wasn't doing it defore the engine came out, we went back and tightnened everything last night but still no good.:frown