peter4858

New Member
Hi all, just fitted a light bar on the roof of my RRC, 4 spots on it , what would be the best cable to use. have done a temp to see if all works ok whitch they do , used a 30amp relay / switch and 240 cable (as i said just as a temp job) but this gets very hot so i did not run them to long , what would you all use thanks .

Peter....
 
I would use 6 mm so the fuse blows before the cable, those bulbs draws near 19 amp together (18.34)
 
Firstly Don't run them as four lights. run them as 2 pairs. with seperate relays and switching. are you wiring in series or parrallel?? There are plenty of guides to wiring spots in. [smile]Do A Search[/smile]
 

Similar threads