When I give my Disco 1 full left lock,especially in reverse,the tyre hits the radius arm.I can't see any obvious wear on bushes etc.. and can't see the lock stops suggested in the haynes manual to adjust.It's ok on full right lock.Any suggestions/photos where I need to look would be helpful thanks.
leekegs
New Member
Hello
Look on the plate that retains the swivel seal about half way up at the front it is the large bolt sticking out they are opposite each other so when you have found it look across to the other swivel and you will see the other you won't have to wind it out very far.
hope this helps
Leekegs
Look on the plate that retains the swivel seal about half way up at the front it is the large bolt sticking out they are opposite each other so when you have found it look across to the other swivel and you will see the other you won't have to wind it out very far.
hope this helpsLeekegs
