W

wilkj91

New Member

• Jan 22, 2010

• #1

ime looking at puting an LED light on the back of my 90 as a work light haw would i go about wiring this up ??

 

Pikey

Dummy Ejection Facilitator..

• Jan 22, 2010

• #2

under the metal covers below the rear windows there is a load if wires one of em is a permanent live (white IIRC) just run a feed off there and fit a switch into the cover.

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Jan 22, 2010

• #3

purple and white from memory -when mine melted to side lights right hand side (offside)

 

W

wilkj91

New Member

• Jan 22, 2010

• #4

right ile have a look, thanks lads

 

ratty

I'm not special I'm limited edition

• Jan 22, 2010

• #5

Your best bet is to run a fresh wire with a switch on yer dash. There's nothing worse than getting a flat battery cos some little scrote turned yer light on when they walked past it.

 

W

wilkj91

New Member

• Jan 22, 2010

• #6

would u run that from the same pour suply thow just change the switch location to a chave proof one ?