W

whittle

New Member

• Dec 9, 2007

• #41

thank you for the feed back it will help me with designing the product, cheers

 

Poacher 65

New Member

• Dec 9, 2007

• #42

Sean said:

i have some pull marine cord flares in the garage, i might line them up underneath me bonnet and tie orf one of the cords to me rad mount so it goes orf when i opens the bonnet, then when yer done just tie orf another one ready fer when you open yer bonnet next

Click to expand...

Fukin genius.dont get em mixed up wiv thunder flashes!!

 

G-man

BBQ king

• Dec 9, 2007

• #43

i gots a tratta so i needs light to work on it i am going to fit a set of spots on the roof rack (when i have made some clamps to hold the roof rack on) then bonnet off angle a lamp down, but untill then it would be handy to have a lamp with an indipendant power supply that could clip on to the bonnet or body like a flexi lamp with superbright LEDs or a fluro strip light or a combination of the two fluro strip for general ilumination and leds for iluminaltin where the strip cant light

 

bez_man

New Member

• Dec 12, 2007

• #44

Put a USB port under the bonnet and u can put one of these USB flexi LED lights under there..

 

D

discomania

Well-Known Member

• Dec 12, 2007

• #45

Make sure its got good coverage - if you put it in the middle and its not god wide enough spread then the light won't make it down the sides of the engine very vell.

 

Blippie

Well-Known Member

• Dec 14, 2007

• #46

Sean said:

methinks he'd have got much more interest if he'd put this in the gaylander section

Click to expand...

Many a true word. I'd like a wipe-clean waterproof 12v strip lamp mounted to the underside of the bonnet. Or may be an LED directional spot for the 90.

And onions.

Blippie