brian247 · May 19, 2018

Hi,
Can anyone help me out i need to find the right size bolts to buy, to fit a genuine land rover discovery 2 tow bar.
There is 2 bolts that screw up into the chassis anyone know what size i need to get?
Many Thanks

Brian

brian47 · May 19, 2018

The two bolts which screw into the rear cross member above the tow hitch are M14 x 85 mm.
You might have to get yourself a M14 tap to clean out any crud which might have built up in the threaded holes.

brian247 · May 19, 2018

brian47 said:
The two bolts which screw into the rear cross member above the tow hitch are M14 x 85 mm.
You might have to get yourself a M14 tap to clean out any crud which might have built up in the threaded holes.

We tried an M14 X 90mm it was screwing in so far but then went tight as hell, we thought perhaps we had the wrong length. But as you say the thread may need cleaning out.
Thanks for the reply
Brian

brian47 · May 19, 2018

@brian247
As a new member you might not have come across RAVE. It's the LR workshop manual and loads more for the Disco, including the instructions for fitting the various LR towing kits.

You can download it free from:-

http://www.myrangerover.co.uk/rave-workshop-manual/

It's a bit of a big download and be warned, it doesn't work on mobile phones or crApple-Mac stuff.

brian247 · May 19, 2018

brian47 said:
@brian247
As a new member you might not have come across RAVE. It's the LR workshop manual and loads more for the Disco, including the instructions for fitting the various LR towing kits.

You can download it free from:-

http://www.myrangerover.co.uk/rave-workshop-manual/

It's a bit of a big download and be warned, it doesn't work on mobile phones or crApple-Mac stuff.

Ok thanks for that bud, it may come in handy.
Cheers
Brian

brian247

New Member

brian47

Well-Known Member

brian247

New Member

brian47

Well-Known Member

brian247

New Member

Similar threads