garioch43

Active Member

• Sep 2, 2008

• #1

Just got my 2002 4.4HSE back from a service and the external temperature display is showing farenheit instead of centigrade.

Any idea how to change it back to centigrade.

No satnav, so can't control it from there.

 

P

P Carr

New Member

• Sep 2, 2008

• #2

I had the same problem. I am sure it changed after diconnecting and reconnecting battery. My fuel consumption also used to show:- KM/litre but is know MPG.

 

zzr1200

Well-Known Member

• Sep 2, 2008

• #3

Your Owners Manual should tell how to change the A/C display from F*to C*.

On a P38 you push and hold the 2 outer air flow direction buttons on the HEVAC control panel for about 4 seconds, if I remember correctly...

 

garioch43

Active Member

• Sep 2, 2008

• #4

Thanks for the feedback guys.

I can change from MPH/MPG to KPH/KPG using the programming functions of the trip computer.

It's not the Aircon display, it's the external temperature display, which is part of the instrument cluster.

 

Davec

New Member

• Sep 2, 2008

• #5

Is it amongst the setting on the Sat Nav display. If I remember rightly, top left button.

 

garioch43

Active Member

• Sep 3, 2008

• #6

Davec - it's an HSE, so no satnav

 

Trewey

Cockernee, Pasty munchin bastid.

• Sep 3, 2008

• #7

whadeyer want them funny fookin furrin measurements fer anyways.
good ol farenhite is much betterer.

 

garioch43

Active Member

• Sep 7, 2008

• #8

Stop looking!

With the ignition key in position 1, press and hold the trip odometer reset button. While holding the button in, turn the key to position 0. This changes the temp display on the A/C and the exterior temp display.

 

S

slicer

Member

• Dec 6, 2010

• #9

Thanks for that!! Mine did the same, it's nowhere in the manual.... Cheers