K

kj200sx

New Member
are the l322 bonnet and p38 the same as thinking of doing front end conversion but want to use l322 wings bumper etc etc as like the vents better on the l322 than the sport do the l322 wings/bumper/bonnet etc fit or is it a massive job any advice would be great thanks
 
and dont say leave it alone as i like the later lights etc but dont want it to look over the top just tink the lights/side vents would make it look better
 
thanks for that just wanted to know what to keep an eye out for befor buying stuff that will be a waste of time/money
 
I am just about to strart an L332 to P38 conversion. Figured I would buck the trend and go the other way. I will let you know how I get on and forward any measurments that may be of help.
 
howardo said:
why?:confused:
Click to expand...

I think if I'm decoding Rewmers post correctly it comes out as

I am just about to strart an L332 to P38 conversion. Figured I would buck the trend and go the other way. I will let you know how I get on and forward any measurments that may be of help.

******S*******A******R******C******A*******S*******M

but I might be working the cipher incorrecctly:D:D
 
Davinci code???

Im gona work on mine too, make it old school and go way back, turning it in to a Horse!!!
 
SpudH said:
I think if I'm decoding Rewmers post correctly it comes out as

I am just about to strart an L332 to P38 conversion. Figured I would buck the trend and go the other way. I will let you know how I get on and forward any measurments that may be of help.

******S*******A******R******C******A*******S*******M

but I might be working the cipher incorrecctly:D:D
Click to expand...
lmfao
 
hi there, new to this so here goes ,ive got a range rover p38 that i am just starting to convert to l322 2007 front end but iam looking to fit vogue l322 front wings has any body done this and ,ive have seen a lovely black p38 with front conversion l322 square headlights on this site that belongs to {cossiedave}it looks like it has got original l322 front wings on it with vent and bottom slat.would like to here from anyone with ideas,cheers.
 
sleepless nights said:
hi there, new to this so here goes ,ive got a range rover p38 that i am just starting to convert to l322 2007 front end but iam looking to fit vogue l322 front wings has any body done this and ,ive have seen a lovely black p38 with front conversion l322 square headlights on this site that belongs to {cossiedave}it looks like it has got original l322 front wings on it with vent and bottom slat.would like to here from anyone with ideas,cheers.
Click to expand...

The money needed to do a conversion would get you most of the way to an L322 anyway, save the hassle, save the shame, and get a proper one!!!
 
P38 with l322 conversions.lol

Be proud of what you drive!

If you want a l322 go and buy one!
When you try and make a car look like another vehicle, people with that vehicle will just take the ****.
 
You must log in or register to reply here.

Similar threads

Padda.116
L322 orginal parts please?
Replies
4
Views
538
backinblack
backinblack
I
stolen recovered repaired / confused ride quality
Replies
7
Views
791
Graculus
Graculus
W
l322 broken brake servo?
Replies
17
Views
1K
Mark Piercy
Mark Piercy
Crankington
L322 pulling my hair out! (Not much left)
2 3
Replies
58
Views
3K
Pug957
P
awkwardbob
L322 2003 L322 Can’t open bonnet -battery flat
2 3
Replies
55
Views
4K
backinblack
backinblack