Forgive my ignorance J, but why should you run the heater full and hot when you change the coolant?:confused:
 
it can take 5 mins or 15 mins you just have to get all the air out i never rev mine just tick over and dont forget use hotish water when topping up not cold lets know how you get on
 
j the range said:
it can take 5 mins or 15 mins you just have to get all the air out i never rev mine just tick over and dont forget use hotish water when topping up not cold lets know how you get on
Click to expand...

siht already put cold in now, doing it now so ill let you know, how do i know when all air is out, also as i used cold water have i stuffed it :mad:
 
j the range said:
it will stop bubbling up and over just watch for small bubbles hope you remembered anti freeze
Click to expand...


thats wat i done but wasted it so i have to go it again tom now (i know im a tawt), still few small bubbles from the small black overflow so give if few more mins
 
greatwell done next time some body asks same it be you turn to help, i would go for slod drive not to far round block then you know its good j
 
j the range said:
greatwell done next time some body asks same it be you turn to help, i would go for slod drive not to far round block then you know its good j
Click to expand...


the thing is soon as i read what you put i remembered never mind, ill test it in morning i had few beers now :D
 
You must log in or register to reply here.

Similar threads

P
Sport Coolant not circulating
Replies
11
Views
1K
pllaw
P
R
L322 4.4tdv8 change oil cooler
2
Replies
22
Views
3K
roythebus
R
B
[P38] Exhaust gases in coolant
16 17 18
Replies
345
Views
13K
blue_cheese
B
A
P38A Coolant in cylinder head inlet passage
Replies
5
Views
1K
Eldon
E
feyniriel
P38 2.5 diesel engine overheating
Replies
13
Views
2K
feyniriel
feyniriel