M mrbond New Member May 18, 2012 #1 Just had a recon gear box fitted in our 109 pickup 'Suffering Sophie'. Currently have to hold the gear stick all the time to keep her in first gear, otherwise it jumps out. All other gears are fine. Any ideas anyone?? Please!
Just had a recon gear box fitted in our 109 pickup 'Suffering Sophie'. Currently have to hold the gear stick all the time to keep her in first gear, otherwise it jumps out. All other gears are fine. Any ideas anyone?? Please!
jamesmartin Well-Known Member May 18, 2012 #2 incorrect seletor shaft fork adjustment ,slipper pads in synchro hub not fitted correctly ,worn dog teeth on gear ,loose rear mainshaft nut,
incorrect seletor shaft fork adjustment ,slipper pads in synchro hub not fitted correctly ,worn dog teeth on gear ,loose rear mainshaft nut,
Dippypud Never Knowingly Understood Full Member May 18, 2012 #3 Check mainshaft nut is tight , you can get to nut by removing plate on top of t/box just behind gear box. sometimes selector not moving fully
Check mainshaft nut is tight , you can get to nut by removing plate on top of t/box just behind gear box. sometimes selector not moving fully
T Tickman Member May 18, 2012 #4 If it is a recon box get onto who supplied it before you go inside and void any warranty. John
