W

Willos

Active Member

• Apr 18, 2011

• #1

Rangie is running like a dream after all the hassle of new head gaskets and total new coolant system.
Now we have a new poblem. Its constantly hot in the passenger side and still vriabe in the drivers side. Has the book sign on the temp readouts. can this be reset or are we looking at the blend motors. can the blend motor on the pasenger side be sorted without taking the whole dash off.
thanks

 

Datatek

Well-Known Member

• Apr 18, 2011

• #2

Blend motors, do a search, lots of info on here or go to Range Rovers

 

discomalc

New Member

• Apr 18, 2011

• #3

Yup blend motors, do a search there are a few threads with possible ways to try to free up a stuck motor but most prob have to swap them out. while you have the dash off might as well do all three. if one has gone the others prob not too healthy.

 

W

Willos

Active Member

• Apr 18, 2011

• #4

If its just the passenger side then will it just be the passenger or one on the drivers side

 

Datatek

Well-Known Member

• Apr 19, 2011

• #5

Willos said:

If its just the passenger side then will it just be the passenger or one on the drivers side

Click to expand...

You could try excercising the temperature up and down a few times and see if it frees off. The passenger side is, I think, easier than the drivers side, full details of how to change it on www.rangerovers.net