ar1g3

Well-Known Member
I had an accident today with my p38, drove into someone else's back at around 30mph.

Front crossmember bent as he had a towbar
1000017057.jpg

1000017061.jpg



Is this the end of my range rover?

Front crossmember is part of the chassis and not bolt on so..
 
Yes but any repair workshop could probably weld a replacement in. Cost vs replacement P38 depends what you want. Yours was getting rusty before the accident anyway.

If you don't want to repair yours use it as a donor car for a cheap P38.
 
Morning
Just took a look at my cross member, I would say it is not much of a job. Remove bumper and all other parts to give good access but keep it driveable.
Take pictures and then go to local sheet metal or welding shops, they will love this kind of work, easy to cut out, heavy steel, easy to weld, should take one day or less with many tea/coffee breaks.

I have welded many classic cars in my time and would think this to be a fairly easy job, up on ramps. front of car, not much more to say.

Good luck!
 

Similar threads