LAMPRO

Active Member

• Sep 22, 2014

• #1

just had it plugged in by a nice bloke for a brew it came up front passenger wheel sensor showing a fault, would this be a new front hub job as the sensor is connected, I have had a look at the sensor and it dosent look great prob as old as the car cleaned connections and no change.

 

brian47

Well-Known Member

• Sep 23, 2014

• #2

Almost every member with experience of this problem will say "Change the whole hub".
It's highly unlikely that you will ever repair the sensor system in the hub, so don't even waste your time trying.

 

Disco DJ

Active Member

• Sep 23, 2014

• #3

It's okay if you have your own nanocom etc and have the time to muck about adjusting/replacing the sensor. But I was paying £30-£40 every time lights needed resetting so quickly went for changing both rear hubs when mine were playing up ("intermittent (both) rear sensor faults")

 

LAMPRO

Active Member

• Sep 23, 2014

• #4

cheers lads just double checking thanks for the advise

 

DIFFLOCK66

Well-Known Member

• Sep 23, 2014

• #5

Yep, just agreeing with brian47