scott02464

Active Member

• Dec 17, 2009

• #1

Hey there!

Does anyone know if the clutch arm in an LT95 gearbox fits an LT77?

Also does the handbrake drum from the same LT95 fit an LT77 gearbox??

And lastly does anyone know what size bolts (Mainly struggling with the bolt thread size) i need to use to mate my LT77 gearbox with the transfer box please? There are threaded holes ready for the bolts to fit in!

I know i could always drill the threads out and put in any old bolts but may as well put the rights ones in....

Cheers, Scott:behindsofa:

 

*minty*

Well-Known Member

• Dec 17, 2009

• #2

come on guys, give the bloke some advice on ere

 

Pikey

Dummy Ejection Facilitator..

• Dec 17, 2009

• #3

Int got a clue bout the clutch arms but thread sizes are m12 (if it a 19mm spanner size) and M10 if there 17mm spanner size.

 

scott02464

Active Member

• Dec 17, 2009

• #4

Cheers minty and redhand!

Iv got a guy whos offered to buy me LT95 off me but im just wondering whether or not to leave the handbrake, drum etc just incase it fit me new LT77......

If it doesnt fit then i could leave it on and bargin some more money out of him/her

 

Tig9619

Active Member

• Dec 17, 2009

• #5

clutch arm if v8 should be the same but handbrake drum will not be, i think the 95 is smaller and fatter.

 

scott02464

Active Member

• Dec 17, 2009

• #6

OK Mate, with it being smaller and fatter would that mean the prop wont fit it?