tulipandthistle · Jun 30, 2016

If I replace my instrument cluster I know I have to sync it,

The question is; can I do this with my nanocom, if so how?
Can I put my own disco's mileage in?

sierrafery · Jun 30, 2016

if the replacement instrument pack has higher mileage than your's you can't do anything to reduce it, if it's lower synk ODOMETER to BCU in UTILITY, then in TRANSM-LOCK-WARN - disable odometer warning.... DONT SYNC BCU TO ODOMETER!!!

tulipandthistle · Jul 1, 2016

Ok, I hope it hasn't have higher milage so, I need the right milage for tax and accounts reasons.

Cheers for that Sierrferry, one day I know as much as you!

janderson41 · Jul 1, 2016

Curiosity???
why do you need to change instrument panel?

tulipandthistle · Jul 1, 2016

Tried to fix the ACE led because the previous owner removed it to hide the problem. While failing to do that I broke my rev counter.

tulipandthistle · Jul 2, 2016

sierrafery said:
if the replacement instrument pack has higher mileage than your's you can't do anything to reduce it, if it's lower synk ODOMETER to BCU in UTILITY, then in TRANSM-LOCK-WARN - disable odometer warning.... DONT SYNC BCU TO ODOMETER!!!

OK I did odometer to BCU, said it was doing it but no confirmation.
Cant find Transm Lock warn maybe because it is a manual?

Milage still flashing.

neilly · Jul 2, 2016

You Should have Trans lock warn,

I have it on mine.

look in the Valeo BCU area.

Valeo BCU / settings / trans lock warn / odometer error warn.

tulipandthistle · Jul 2, 2016

I will check now!

tulipandthistle · Jul 2, 2016

Ok found it, car is now not starting anymore?

tulipandthistle · Jul 2, 2016

starting again, milage still flashing and on the low milage instead of my own ;-(

neilly · Jul 2, 2016

disable the warning and the mileage should stop flashing.

tulipandthistle · Jul 2, 2016

Yep, I have got that done, the only thing now is that I still have the low mileage and chimes when I turn on the ignition.

It just wont sync, I have got all the right warning lights on now etc but still it doesn't sync to the higher mileage.

neilly · Jul 2, 2016

Do you have the latest software of nanocom? it was updated the other week.

I have never tried to sun the odo and BCU. so i cannot tell you anymore than what it states in the book. what chimes do you have?

Cheers

neilly · Jul 2, 2016

Do you have to type in the correct mileage in KM? and sync it that way?

tulipandthistle · Jul 2, 2016

No I didn't update it, will have a look at that now.

It gives 6 bongs when I turn the ignition on

neilly · Jul 2, 2016

Just one thing before you update it, there is one problem where the instrument panel first page does not update unless you are recording the data to a n SD card.

tulipandthistle · Jul 2, 2016

neilly said:
Do you have to type in the correct mileage in KM? and sync it that way?

No I don't, when I look at the kilometers in the nanocom there is a 100,000 km difference. The instrument cluster has the low mileage while my BCU still has the correct mileage

tulipandthistle · Jul 2, 2016

neilly said:
Just one thing before you update it, there is one problem where the instrument panel first page does not update unless you are recording the data to a n SD card.

Thanks for the warning, I will get an SD card first!!

neilly · Jul 2, 2016

reading the manual, it reads like you have to type the mileage into the nanocom to set the Km.

tulipandthistle · Jul 2, 2016

neilly said:
reading the manual, it reads like you have to type the mileage into the nanocom to set the Km.

OK, I didn't see that one, where did you find that?

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Similar threads