Marmaduke

Marmaduke

Well-Known Member
Need to do a bit of rot replacement on the 300tdi I've just bought. Do any of you knowledgeable folks know what thickness the steel is so I can purchase a sheet of it from eBay? I don't need to replace the whole lot so I don't need to buy a yrm bespoke job.
I've already got a sheet of 2.5mm but that seems over kill.
Thank you kindly :D
 
Overkill works for me id use the 2.5mm, or id just weld it with what I had even if it was 6mm lol
 
I use a localish steel stock holders, it's been a few years now but an 8'x4' sheet of slight damage was £15.
 
Thanks for the replies, I've just bought a sheet of the stuff off eBay, not quite as cheap as yours @Flossie but at least I won't have to drive to Loughborough to collect it
 
Marmaduke said:
Thanks for the replies, I've just bought a sheet of the stuff off eBay, not quite as cheap as yours @Flossie but at least I won't have to drive to Loughborough to collect it
Click to expand...
bloody hell! how many discos have you got now?! did you manage to salvage any decent bits off my old girl?
 
Bobdog said:
bloody hell! how many discos have you got now?! did you manage to salvage any decent bits off my old girl?
Click to expand...
Recycled everything I could in the time I had, had a discovery, p38 and now this discovery since then :p current one has 10 months Mot but needs a couple of jobs doing before it goes back on eBay. It cleaned up pretty well though but it'll be pulling the engine out on Friday to sort out the noisy flex plate
DSC_0233.JPG
 
You must log in or register to reply here.

Similar threads

F
What thickness metal?
Replies
2
Views
862
Bas_on_a_mission
Bas_on_a_mission
Officerdibble
Swivel housing inner gasket
Replies
7
Views
531
Def90man
Def90man
C
repairing bulkhead in situ
Replies
2
Views
866
ER1C
ER1C
julianf
Who actually makes the defender repair panels?
Replies
4
Views
435
miktdish
miktdish
S
materials to repair dash
Replies
4
Views
2K
thatblokedowntheroad
thatblokedowntheroad