Stone56 · 2025-07-18T16:23:37+0100

DanClarke said:
... A bit unhappy to find that the bonnet paintwork on the old P38 is a bit "rough".
I had the car cleaned inside & out today and brought it home and the top on the bonnet is all gnarly and "pitted" feeling.
There's "spots" on it too like the paint it discoloured.
Ho Hum.

The roof? Just a thought if thay used sea foam and it dried on in hot sunshine

DanClarke · 2025-07-18T21:04:22+0100

Stone56 said:
Was it like it before the clean ? THAY may have used the wrong stuff or to aggressive cleaner

Well the other panels are all fine so I think it is just the bonnet.
It does look nice though (overall).

Stanleysteamer · 2025-07-18T22:12:26+0100

DanClarke said:
Well the other panels are all fine so I think it is just the bonnet.
It does look nice though (overall).
View attachment 345751
View attachment 345752

Is it just that the clear/lacquer coat is going orf???

landowner · 2025-07-18T22:50:40+0100

Problem (maybe)
Looking to replace these pipes from the pipe cover to the radiator.
15mm to 10mm elbows then 10mm micro pipes along top of skirting boards to rad.
Reason is so I can lift pipes higher and get tighter bends to rad valves, should look neater than what's there now.
Is there going to be a pressure problem reducing the pipe diameters?
Be kind I'm not a plumber

Skirting only loose fitted btw, not a joiner either

Stone56

Well-Known Member

DanClarke

Well-Known Member

Stanleysteamer

Well-Known Member

landowner

Pensioner Pete

Attachments

Similar threads