I was going to write another HowTo but changed my mind as I know the electrical types will get all in a tis about my wiring skills.

I went to the shop to find some 100w H3 bulbs but they had none in stock so I have 130w instead.

The lights are the biggest I could find in a local shop (I like to shop local if I can). IIRC about 8in. I have some 12v LEDs that I might put in at some point to use as sidelights.

I also took the chance to fit a earthing strap to the rear drivers side of the engine but I wasn't long enough to get back to the chassis. So I will get a longer bit of wire.

looks nice, but i like the stock look of the facelift D2

defcrazy said:

looks nice, but i like the stock look of the facelift D2

Click to expand...

I also like the look as standard. But I wanted the extra lights. I drive quite a bit at night and its nice to be able to see. Also in a area full of LR owners I wanted mine to be a little different so my mates can spot me a bit easier.

I originally wanted the LR Soft A bar but they are silly money and almost impossible to get hold of.

jackstringer said:

I originally wanted the LR Soft A bar but they are silly money and almost impossible to get hold of.

Click to expand...

What about the tubular ones.



There about on ebay at the moment. Not everyone cup of tea as they are quite bulky.

Del.