R

reylem

New Member

• Aug 19, 2010

• #1

My bro in law has a landrover 90 td5 2003 - he wants to know how you go about wax oiling the bulk head. Any Ideas anyone?
thanks

 

90boy

Well-Known Member

• Aug 19, 2010

• #2

it quite simple clean the area then either paint or better spray the wax oil on

 

disco2shaun

New Member

• Aug 19, 2010

• #3

remove dash, and all other bits attached to it. if you want to do it properly that is?

clean floor pans up and paint with hammerite not waxoil as your mats will stick to it

and behind the front wheels you can also access the other side of the bulkhead (floor pan) that gets the most weathering from the road

 

B

Beast o Bodmin

Banned

• Aug 19, 2010

• #4

stick the carpet down with waxoyl it stops the water coming in.

 

Jamz

New Member

• Aug 19, 2010

• #5

Sorry to hijack the thread but whats the best way to wax oil the chassis too (especially the inside)

 

johnnyoxford

New Member

• Aug 20, 2010

• #6

Jamz said:

Sorry to hijack the thread but whats the best way to wax oil the chassis too (especially the inside)

Click to expand...

I would like to know too on this point, lots of stuff on here if you search, saying jack it up and pump it in, but never seen a single picture! Has anyone really done it?

cue the "waxoyl makes your camera dirty" replies, but surely somebody has some pics?

Or do we all have a full 5 litre can of waxoyl in our shed??? ( I do!!! ) and not really know where to start???

 

Last edited: Aug 20, 2010