Apply 27 Nm of torque to output flange nut with transfer box in neutral. VCU should move 90 degrees in one minute as i remember it.
Last edited:
tomcat59alan
Well-Known Member
tomcat59alan
Well-Known Member
Just checked, my memory is obviously not up to much. Apply a clockwise torque of 27 Nm to output flange nut. If no resistance is felt unit is duff. If resistance is felt apply a clockwise force of 20 Nm to flange nut for one minute in that time unit should move 25 to 30 degrees.
tomcat59alan
Well-Known Member
So not as stiff as you thought eh.
No, if it only moves 25 to 30 degrees with slightly less torque stiffer than i thought. There is something else that is not as stiff as it used to be but can't for the life of me think what it is.
ovalandrover
Well-Known Member
No, if it only moves 25 to 30 degrees with slightly less torque stiffer than i thought. There is something else that is not as stiff as it used to be but can't for the life of me think what it is.
Perhaps that is because there nis more being spent on Viagra and boob in plants than on Alzimers every one is running around with big tits and a hard on but cant remember what to do with them
tomcat59alan
Well-Known Member
Politicians must get free Viagra then. Cause there are a lot of big dicks running the country in my view.
tony2
Active Member
It's worse than that Wammers.
There are a lot of big dicks in Government NOT running the country in my view.
tomcat59alan
Well-Known Member
Don't call me a politician !!!
Don't call me a politician !!!
:hysterically_laughi:hysterically_laughi
